Everybody loves using a Wood Router. These days people are eager to learn new things which they can try on a wood router.  As we all know wood router is a very useful device for everyone.

There are so many things that you can do with a wood router. Shape it, cut it, design it etc. do anything with a wood using a wood router.

I follow some very basic tips and tricks which are very helpful for me.

All my life I have been doing stuff with wood, so in all this time I have learned some few tricks which would be beneficial for any person using a wood router.

First basic thing you can do is that a wrench should always be connected to the power cord. You should also know how to setup a wood router.

So let’s start with cutting your name on the board. I just hot glue the wood on the table, it helps me a lot. If you have a very slim wood then you can even screw it to the table. This way the router is free on and off the wood. Just carve the letters on the wood so that you don’t do anything wrong while cutting it.

woodworking-router

When you plunge straight in sometimes the router starts vibrating. What I do is bit some space around it, this way it doesn’t vibrate and make a big cut which was not intended.

I always scrap away the material so that the bit is never trapped, that’s how you avoid vibrations which could mess up things. One thing you should be aware of is that you don’t want to overheat the bits. You should not go too deep too fast or you would end up over heat the bits. When you have a small bit it gets overheated quickly so you must take small bits so that it doesn’t get completely trapped by the material.

If you are going to do any kind of sign work then I have a technique which might be useful for you. Take any color of spray paint and spray it over the letters and the spray paint dry for some time. Once it dries you have to scrap the paint off with a surface planer and you will see how nice the design looks now.

router

Now I will tell you some plates, you can even make your own plates.

A lot of times when you are using a flush cut bits you realize that you are off the pattern in your interior wood. Always make sure that your bits are oiled even after just a couple of cuts. Oiling ensures that laminating glue will not stick to the outside and also it will keep it moving.

When you are working with the router kept on the table make sure to attach a big plate under the router and keep a heavyweight on the plate. It ensures that the plate will not run away from you at any point of time.

So here are some tips and tricks that you can try with your wood router. If you have any queries or new tips in mind then don’t forget to comment below. You should also read best wood router review.

Write A Comment