Tag

copper chef

Browsing

How to Grill The Best New York Strip Steak – Copper Chef Recipe

This grilled meat recipe is loved by almost all of America. Its popularity keeps rising as soon as a newbie tastes it. The marinated sauce and the meat cooked to perfection just does something to the one having it.

This dish is served best for dinner and I am confident that the recipe we are providing will surely have your guests licking their fingers. You just have to use the copper chef so that the steak will be grilled properly.

Servings-4

INGREDIENTS

  • Two tablespoons of olive oil
  • Four NY strip steaks of 1 lb each
  • Salt for flavor
  • Dark pepper for flavor
  • Six cloves of garlic
  • Three sprigs rosemary

Directions

  • You need to preheat the oven to 400° F
  • Now warm the pan by putting on medium heat and that should do the job
  • Pour some olive oil into the pan for some greasing
  • Now we need to add salt and ground pepper to the steak for some added flavor
  • Now add the steak to the pan and grill it for about four minutes
  • Now turn over the steak and pour some garlic and rosemary into the pan
  • Cook the steak for another four minutes
  • You now need to transfer the pan to the oven and cook at 400° F until you wish (preferred timing- 10 mins)

Now you have unlocked the recipe to make an amazing steak. Serve it at the dinner table and just wait for the compliments.

Perfect Roast Turkey Recipe – Copper Chef Recipe

One of the most famous poultry products in America because it is usually consumed in the festivities such as Thanksgiving and Christmas as well. Let’s prepare this amazing turkey and dazzle your family at the dining table.

Serves-8

INGREDIENTS:-

  • Fifteen-pound turkey
  • Two tablespoons of olive oil
  • One tablespoon salt
  • Two spoons of ground black pepper
  • Half tablespoon onion powder
  • Half tablespoon garlic powder
  • One tablespoon rosemary
  • One tablespoon dried thyme
  • One tablespoon dried sage
  • One tablespoon paprika
  • Two cups of chicken broth

Directions:-

  • You need to preheat the oven to 350° F.
  • Now carefully place the turkey in the pan and rub olive oil on the turkey for grilling purposes always use a copper chef round pan.
  • Now take salt, black pepper, onion powder, garlic powder, rosemary, thyme, sage, and paprika and blend them together in a bowl and just smell the aroma, I am sure it will smell organic and amazing as well.
  • Lace the turkey with the seasonings and your turkey is half prepared.
  • Now put the chicken broth into the pan and give it a little stir.
  • Now the main task is to roast the turkey up to 350° F until the temperature of the turkey reaches about 160° F which will approximately take about three hours.

The best thing about this dish that usually it is liked by the whole family and it makes up for the lost time by increasing bonding between the family members. Enjoy!!

Pork Osso Bucco Recipe – Copper Chef Recipe

So today, we will discuss how to make Pork Osso Bucho with the help of our copper chef.

Helpings: 6

Components

  • Six pork shanks
  • One tablespoon Sea Salt
  • Half tablespoon ground black pepper
  • Quarter cup olive oil
  • One average yellow onion, chopped
  • Two big carrots, cut into cubes
  • Two celery stalks, cubed
  • Three cloves garlic, crushed
  • One shallot, shredded
  • One  stick butter
  • 0.333333 teacup flour
  • Half cup White wine
  • Three cup Beef broth
  • Half cup rumpled tomatoes
  • One bay leaf
  • Two Sprigs Thyme
  • One Sprig rosemary
  • Two cloves garlic, crushed
  • One Lemon Zest
  • 0.25 cup chopped parsley
  • Two tablespoons Extra Virgin Olive Oil

Directions

  • Heat up the oven to 350° F.
  • Now add salt and pepper to the pork to add some taste.
  •  Put olive oil on the Casserole Pan and heat each side of the pork shanks.
  • Take away the pork shanks from the Casserole Pan and set them sideways.
  • Increase onion, carrots, celery, garlic, and shallot to the Casserole Pan and warm it for 4–5 mins.
  • Add the butter and cook for 3–4 mins. up until creamy.
  • Add the wine, beef broth, crushed tomatoes, bay leaf, thyme, rosemary, and shanks.
  • Take to a boil and cover with the Shallow Pan. Cook at 350° F in the oven for 3 1⁄2 hrs. or till the meat is tender and falling off the bone.
  • Blend the gremolata ingredients together in a bowl.
  • Serve each shank with a sprinkle of gremolata

Now you have unlocked the recipe to make an amazing steak. Serve it at the dinner table and just wait for the compliments.

Simple Au Gratin Potatoes – Copper Chef Recipe

Potatoes have always been the staple food and one of the most popular dishes worldwide. People love potatoes because they are easy to make and an excellent source of carbs.

Tender potatoes and onion slices smothered in a quick cheesy sauce and baked until golden is simply mouthwatering. Here we have a simple and well-loved recipe for you which we ensure you will love if you manage to cook it right.

Serves- 10

INGREDIENTS:-

  • Two sliced white onions
  • Stick butter
  • Eight medium sized potatoes
  • One-quarter heavy cream
  • One tablespoon mustard
  • Two tablespoon salt
  • One teaspoon black pepper
  • One sprig rosemary chopped
  • Eight slices of swiss cheese

DIRECTIONS:-

  • You need to preheat the oven to 350° F.
  • Put onions in the pan with butter and saute the onions until they become light red.
  • Now slice the potatoes with a knife into one-eighth inches rounds.
  • Stir together the cream, mustard, black pepper, salt and rosemary in a bowl to make the cream mixture.
  • Now place the swiss cheese slices over onions.
  • Now pour the cream mixture over the top of potatoes and let it settle down.
  • Cut the remaining cheese into slices and scatter it on the top.
  • Now you can garnish the dish with a hint of rosemary.
  • Put the dish into the oven at 350° F and bake until it turns golden brown.

Well, this was a recipe for your favorite Au Gratin Potatoes which you can make in copper chef and I wish our recipe helps you to make an amazing dish for you and your family.

Miracle No Knead Bread Recipe – Copper Chef Recipe

Looking for some Copper Chef recipe? Here is the recipe which you can try in your kitchen and make it with the help of copper chef.

Serves-1

INGREDIENTS:-

  • Six cups all-purpose flour
  • One tablespoon salt
  • Two tablespoons active dry yeast
  • Two tablespoon sugar
  • Three cup water 

Directions:-

  • Stir the salt, yeast, and sugar in a bowl and whisk them well.
  • Now pour some water into the mixture which will make the dough sticky.
  • Let the mixture settle down and cover the bowl with a plastic wrap and let it remain this way for another 12 hours.
  • Now preheat the oven to 450° F.
  • Now level the batter into a square shape and roll the mixture and make the dough into an oval-shaped loaf.
  • Now put the pan into the pan and cover the pan with the casserole pan.
  • Now bake the dish and bake it at 450° F for approximately 45 mins.
  • Now remove the dutch pan and cook for another 15 mins.

This bread loaf will do wonders when it comes to the hunger situation, promising that it will surely provide a wholesome experience. You can also read some copper chef reviews here.

You ought to try it once on your lifetime.

How To Cook Deep Frozen Food

A food which is fully cooked or portions of a meal, packaged for retail sale is called as Frozen Prepared Food. They are famous among customers as they are easy to cook and variety is available. A traditional frozen prepared meal includes a meat entrée, a starch-based food, a vegetable, like sauce and pasta. It needs a proper attention to be given by food processor.

Preparing Meal Components:

Meat: It is the bigger component included in frozen meal. There are various methods used for processing in order to prepare the meats like marinating, cutting, cooking and slicing.

  • Marinating: It is done for proper tenderization of the mean and development of wanted sensory attributes, to marinade it is always better. Ingredients used for marinating are normally vinegar, salt, lemon juice, spices, oil and citric acid. By tendering a meat, developed by marinating contains a proteolytic enzyme, which helps for proteins break down. Normally while marinating, meats are either soaked or injected with marinade by using special machines.
  • Cooking: It is required in order to kill pathogens like bacteria which can produce harmful toxins. While cooking, generally, the temperature at the center can rise up to 70 degrees (160 Degrees F) and can be held for 2 minutes.

Immersion fryers are used in types of meats. While frying, cooking and the desired flavors are produced. Hot oil helps the meat surface to sear and helps to lower down the moisture loss while cooking. Breading material coating while frying helps in binding the batter. During the frying process, breading layers absorbs oil while developing its aroma and texture of the food.

Some dedicate food, like fish, are normally pre-fried and breaded in order to bind the breading material. At the time of actual cooking, re-heating of the food is done. But, at the same time, fried chicken is wholly pre-cooked during it frying process. To raise its serving temperature, frozen fried chicken is re-heated.

You can also read our large chest freezer reviews through which you can set proper temperature of chest freezer.

There are normal types of fryers like batch or continuous unit. When the continuous unit is used, food is kept on the feed conveyor, and then it gets into the frying tank filled with oil. A Temperature of the oil is usually 340 to 360 degree F. At the same time, another food conveyor is placed on the feed conveyor, to avoid floating of food in the tank. Speed is properly controlled in order that a food should remain in the oil for the desired time. Besides the tank, the fried food is then moved above the oil and the oil at the surface is again taken into a tank.

An Oven can be used to make important entrees in frozen meals. There are types like conduction, convection, and radiation, by which food is heated. Steam is produced during the heating cycle by some oven designs. The food is placed on to a mesh conveyor with the help of various zones and different velocities and steam flow are used to maintain a proper humidity at a proper level.

Batch type oven is normally used to cook under vacuum. Pressure and temperature are reduced to cook meat in vacuum cooking. A vacuum technique called sous-side cooking; food is cooked in its pre-owned juices in order to retain flavors and moisture. As the low temperature is used, it needs more cooking time. Food is placed in a laminated pouch and vacuum is subjected before sealing. The pouch once sealed cooked in boiling water. Once cooking is done, pouches get instantly cold in cold water before freezing.

 

  • Dicing and Slicing:

As compared to raw meats, cooked meats are more sensitive to handle, meat tissues gets loosely connected with one another after cooking. For that reason, they are cooled in low temperatures; as a result, a muscle fiber stiffens which makes cutting and slicing easier operations.

When meats are frozen, their normal temperature is from -18 to -23 degrees as before cutting, they are tempered. The process includes which warms the frozen food just below their freezing temperature, say between -4 to -1degrees C. Industrial scale microwave ovens normally use this method of tempering of frozen food.

Dicing machines are used to cut the meats in cubes or dicing is done. A revolving impeller is attached with a knife blade is used in a common industrial-scale dicer. On every revolution, the slice is made by the blade from the large piece of meat into a machine. A Cross-cut knife is used to cut a meat in square shapes. Once dicing is done, a product then gets out of the machine.

  • Vegetables:

Vegetables in prepared meals are produced directly from a frozen-food processor, and freezing of raw material is done on site. If the frozen food needs to be stored for a longer duration, those are intended for inclusion in prepared foods is frozen. Or the food is directly taken to processing areas by putting them on meal tray. Always try to take fresh vegetables it will help you to cook your food easily, you can keep your food fresh for very long time with best upright freezer.

  • Pasta:

Size is an important criterion while preparing pasta. It is difficult to control the texture of the spaghetti as it cooks rapidly. While thicker pasta can be cooled after heating in the more controlled way.

Rotary blancher is used to cook pasta which contains a large amount of water. Rotary action contains in a blancher helps to prevent clumping during the cooking process. Once cooking is done, the last step is to washing of the surface starch-off the pasta, to prevent clumping. Stopping of the process is done once the pasta is immersed in cold water.

Sauce:

Sauces and gravies are used to develop sensory attributes to meats and vegetables. It also prevents dehydration of frozen foods due to longer duration of storing. Sauces are normally tomato based or cream based. These sauces are made with spices, thickening agents, emulsifiers, and salt.

  • Preparing Ingredients: Mixing blenders are used to mix dry ingredients once they are weighted. The mixture is dependent on the physical characteristics or features of the ingredient or which shortening agents to be added to it. You must mix all the ingredients with liquids as it is mandatory in order to prevent any inconsistencies in the output product.

Tomato sauce normally consists of tomato paste. It has 24 to 36% of tomato solids. They are kept in drums or multiwall flexible bags. Water is used to flush out the paste and in order to dilute the mixture in a sauce. Then the final puree is then blended with other ingredients to produce the sauce.

Stock solutions is a starting point for cream-based sauces, normally produced by boiling raw stock material like beef, fish, poultry into a water. Large kettles are used which are either open to atmosphere or under vacuum for boiling. When boiling is performed under vacuum, the temperature is remained at around 100 degrees C (212 degrees F), which helps in building more flavors in a stock. Addition of herbs, spices, and salt is done while cooking. Once cooking is done, muscle tissue is removed.

  • Mixing, Cooking, and Cooling:

To make a well-mixed slurry, dry mixes and liquids are mixed while preparing a sauce. Once the slurry is made, it then kept in a cooking vessel, normally open steam-jacketed kettle. Agitators, scrapers, blenders are also used to fit with the kettles. Movement of the product from the heat transfer surface is done by the agitator located on the central axis, which is actually an action which is done through cooking or cooling of a food material. It may happen sometimes, that the fingers of the agitator may move the product to the second agitator for further blending. To prevent producing any burned material due to heating surface, Scraping and agitating is used.

Sometimes, because of continues heating, it may result in swelling or gelation of thickening agents or flavors may be extracted from the seasoning agents. For that reason, cooking is usually done under vacuum to produce volatile and natural color pigments.

Homogenization of cream sauces is done after heating. They are used to make sure that fat globules will produce small size which is important for stabilizing the final emulsion. High speed should be maintained while scraping in order to prevent it from scorching.

Once cooking is done, sauces are cooled instantly at 4 degrees C (40 degrees F). If sauces do not contain any small particulars then cooling is performed with plate heat exchangers. Indirect contact is done among sauce and cooling medium in plate heating exchanger like chilled water. High energy efficiency is assured to confirm countercurrent flow arrangement between sauce and cooling medium. Once done with cooling, a sauce is transferred into chilled holding tanks.

If sauce contains any additional particulars like raisins, dices mushrooms, or cooked a meat, it is recommended that these particulars should be cooked prior to blending with sauce and those are already cooked and cooled. Pre-cooking is normally considered to prevent any adverse effect of heating on its texture.

Assembly And Freezing:

  • Packages: Trays are used created with aluminum foil, plastic, ceramic and paperboard to assemble the meal components. Some particular areas are stamped in trays to place individual meal components. The package can directly be used by the consumer to reheat and then for serving. For boil-in-bag meals, bag is produced with the laminated film. Once the foodstuff is kept in a bag, air evacuation is done and the bag with contents is frozen. A bag can be simply placed in boiling water with its contents to prepare a meal.
  • Assembly: For assembling a meal, a sufficient amount of every component must be available. Normally, pasta, meat portions, and vegetables are kept in large trays in the processing areas. Sauces are taken through pumps. Depositing machines are utilized to weigh the products and to place every component directly on to the tray or in a bag.

A Depositor is used to feeding the frozen vegetables via feed chambers. A chamber consists of a multiple cavities to accept the desired amount of food material. Movement of trays on the conveyor belt is sequenced under the depositing machines. The Opening of cavity is done right above the designated tray. Once the component is placed onto a tray, a sauce is deposited for coating the component.

A tray consists of meal is thoroughly inspected to check that every component is placed on it. Machines are used to inspect whether any undesirable item like metal of glass fragment is not present. And after that trays are taken directly towards freezers.

  • Freezing: It is done instantly after packaging in order to maintain its quality. After keeping a food in a freezer it is frozen at -40 degrees C (-40 degrees F) in 90 minutes. In the belt freezer, food is normally placed on to a wire mesh belt. The belt takes the food to an air-blast room operated at -40 degrees F. Using a single wired belt is simpler, multitier belts can be used to save floor space. In multitier, a food is moved on multiple belts in the air-blast room.

A Smaller arrangement is done in spiral belts. It maximizes the area for available floor space. Famous spiral belts have self-stacking belts.  In this, each tier is placed vertically, which flanges under the tier. Airflow can be configured multiple times. Countercurrent flow vertically allows greater energy efficiencies. An air is placed between the belts to shorten the time required for freezing activity. Dehydration of food is avoided with faster freezing.

For brick-shaped packaged food, plate freezers are normally used. Refrigerants are allowed for circulation inside thinner channel within a plate. The product is placed between plates. Heat can be transferred at higher rates between packaged product and refrigerant plates.

Once the food is frozen, it is then packaged in cartons. Labeling and storing of cartons are done in the frozen warehouse till shipment is done to retail outlets.